User manual

Copyright © 2012. All Rights Reserved. 18
www.sentryus.com R201204-V27
BRIDGE SETUP-WEB CONFIGURATION
Step 5: Logging In – To configure the Bridge through the web-browser, enter the IP
address of the Bridge into the address bar of the web-browser (default IP:
192.168.1.250), and press Enter. If it cannot work, please press the reset
button which is on AP/Bridge. Please see the reference of the enclosed
picture.
Step 6: A screen will be popped up and request you to enter user name and password.
The default user name and password is as follows.
User Name:
Password: Admin
Enter the default user name and password, then press OK button directly.