User manual

StoreSafe Pro II
User Manual
90
The following table specifies the supported options:
Note: When an option is not specified, it will be set to 0. When a normal connection is requested, but the StoreSafe Pro II unit
is already connected via a normal connection, the WaveBrowser should open a live connection instead.
The default page, http://3.18.172.230, does not accept option codes and will open the WaveBrowser in
disconnected state. The example URL from above (http://3.18.172.230/
wrcontrollite_c=1s=2a=3t=1361959858.ssi) requests the WaveBrowser to make a normal connection, play
back at 2/27/2003 10:53:32 displaying camera 1 in medium size.
Email Links
StoreSafe Pro II is able to send emails when certain events occur (like video loss, alarms, etc.). When in record
mode, it will add a WaveBrowser link in the email notification.
Clicking this link initiates WaveBrowser to be started, make a normal connection and play back the specific
camera with a medium size video window at the time the event occurred.
Table 16.
Name Code Description Example
Camera c=<n> Describes either the camera number for fullscreen
(1=Camera 1, …16=Camera 16) or the type of the
multiscreen display (100 = Multiscreen 16 large,
101= Multiscreen 16 small, 102= Quad screen)
c=10
Size s=<n> For fullscreen camera, describes the size of the
display (1=large, 2 =medium, 3= small)
s=2
Action a=<n> Describes the action the WaveBrowser has to take:
0 No action
1 Normal Connection Play
2 Normal Connection Live
3 Normal Connection Goto
4 Live Connection
a=2
Time t=<n> When action is set to 3 (Goto), the time specifies
where to go in number of seconds since 01/01/1960.
t=1361959858