User manual

89
13. Number buttons: Press any of these buttons (up to number 10 on 10 channel units) to call up
individual cameras for display.
14. Single Camera Display Size: Choose from Small, Medium, or Large.
15. 16-way Multiscreen buttons: Not available on StoreSafe Pro II models.
16. 4-way Multiscreen button: Selects a Large 4-way display.
17. View Live Button: Click on this button while connected to view live video.
18. Play Pointer Slider Bar: The Play Pointer slider bar advances to the right to indicate the playback
position on the disk. The user can drag the bar to navigate forward or backward.
19. Goto Button: Click on this button to go to the selected date for the drop down time and date boxes.
20. Drop down Date Selection Menu: Click on this field to display a graphic calendar to select a date to
view.
21. Time Selection Menu: Click on the Up or Down Arrows to select a specific time to view.
The Drop Down Volume List Box
Click on the arrow to display a list of available disk volumes on the connected unit. Click on the volume to
select.
StoreSafe Pro II WaveLink
This feature allows putting command codes in the URL when calling WaveBrowser to control actions the
WaveBrowser is going to perform.
This feature can be used by Web Developers to link various cameras to specific Web content. It will also be
used by StoreSafe Pro II’s Email feature to allow the recipient of an alarm email to click on a link in the email,
which causes the WaveBrowser to connect and play back at the time when the alarm occurred.
Functionality
The traditional WaveBrowser URL is http://<IP_Address>/wrcontrollite.ssi. This URL will start the
WaveBrowser in the disconnected state. The StoreSafe Pro II software supports command codes placed after
an underscore after wrcontrollite and before .ssi. In the following example, the options are in bold.
Example: http://3.18.172.230/wrcontrollite_c=1s=2a=3t=1361959858.ssi.