User manual

StoreSafe Pro II
User Manual
4
Default Passwords
Unpacking
Check the package and contents for visible damage. If any components are damaged or missing, do not attempt
to use the unit, contact the supplier immediately. If the unit must be returned, it must be shipped in the original
packing box.
Table 1. Four-channel units
Password type Access level Function
Changeable by
user Default password
Operator Operator Provides access to the Operator and System
View menus.
Yes Press ‘ENTER’ 4 Times
Installer Installer Provides access to all on-screen menus. Yes 3 4 4 4
Factory Defaults Installer Resets the multiplexer to the factory
defaults (except the time, date, email
addresses, and email IP address).
No 4 1 1 1
Language Installer Provides access to the On-screen Language
menu.
No 1 4 1 4
Ethernet Access
Reset
Installer Deactivates the ethernet password, so that
the unit may be accessed by any PC
equipped with WaveReader.
No 1 1 1 1
Table 2. Ten and sixteen-channel units
Password type Access level Function Changeable by user Default password
Operator Operator Provides access to the
Operator and
SystemView menus.
Yes Press ‘ENTER’ 4 Times
Installer Installer Provides access to all
on-screen menus.
Yes 3 4 7 7
Factory Defaults Installer Resets the multiplexer
to the factory defaults
(except the time, date,
email addresses, and
email IP address).
No 8 1 1 1
Language Installer Provides access to the
On-screen Language
menu.
No 5 4 1 5
Ethernet Access Reset Installer Deactivates the
ethernet password, so
that the unit may be
accessed by any PC
equipped with
WaveReader.
No 1 1 1 1