User manual

71
5. Highlight OK, then press the Enter button. The user will be prompted, indicating if the password was
entered correctly and changed.
The Ethernet Password
Figure 76. The ethernet password box
The Ethernet Password feature limits access to only those users who access the unit using the password feature
of WaveReader versions 2.4 or later. When the unit is first setup, the default is No Password Protection.
Meaning, anyone using WaveReader and accessing with an ethernet connection can connect to the unit.
Activate The Ethernet Password
1. Enter the new password using the Number buttons.
2. Highlight OK, then press the Enter button.
3. Re-enter the password.
4. Highlight OK, then press the Enter button. The user will be prompted, indicating if the password was
entered correctly and changed.
Deactivate The Ethernet Password
To return the unit to No Ethernet Password Protection, enter the Ethernet Access Reset Password in the
password box shown above.
Table 14.
Ethernet access reset password
1111