User manual

StoreSafe Pro II
User Manual
66
Baud Rate
Figure 69. Port 1 baud rate setup screen
Use this menu to configure the baud rate for Port 1 for external control of the unit via RS232. Rotate the Jog to
select a baud rate from the menu.
Save changes and exit the menu: Press the Enter button.
Exit the menu without making changes: Press the Menu button.
Port 2
Figure 70. Port 2 baud rate setup screen
Use this menu to configure the baud rate for Port 2. Rotate the Jog to select a baud rate from the menu.
Save changes and exit the menu: Press the Enter button.
Exit the menu without making changes: Press the Menu button.
The RS232 port 2 is used for Event Generation and ASCII Text Insertion. See RS232 Remote Control Protocol
on page 96 for the RS232 Protocol required to perform these functions.