User manual

61
Main Menu / Camera Setup / AGC
Figure 59. Signal gain setup menu
Use the Automatic Gain Control (AGC) to adjust the video input signal level for cameras whose level is
outside the normal range. The default gain setting is 100%.
Rotate the Jog to navigate and the Shuttle to change the values.
Save changes and exit the menu: Select [OK], then press the Enter button.
Exit the menu without making changes: Press the Menu button, or select [CANCEL], then press the Enter
button.
Main Menu / Camera Setup / Camera Disable
Figure 60. Camera disable menu
Use this menu to Disable or Enable each camera input individually.
Use the Jog to navigate and the Shuttle to change the values.
Save changes and exit the menu: Select [OK], then press the Enter button.
Exit the menu without making changes: Press the Menu button, or select [CANCEL], then press the Enter
button.