User manual

StoreSafe Pro II

User Manual

Camera titles may be displayed on either monitor. Use this menu to turn this feature On or Off.

Rotate the Jog buttons to navigate and the Shuttle to change the values.

Edit Titles

Rotate the Shuttle to select the camera whose title you wish to configure, and then press the Enter button. The

Camera Title Edit menu will appear.

Figure 58. Camera titles edit screen

Camera Title Edit Menu

1. With the camera title selected, press the Enter button. The menu will enter the Edit mode and the

character bank will appear in the center of the menu.

2. Press the Sequence button to select the desired character set.

3. Rotate the Shuttle to navigate the cursor in the camera title.

4. Rotate the Jog to navigate the cursor in the character bank.

5. Press the Number 1 button to insert a blank character or press the Number 2 button to insert the

selected character.

6. When finished editing the title, press the Enter button to exit the edit mode.

7. Save changes and exit the menu: Select [OK], then press the Enter button.

8. Exit the menu without making changes: Press the Menu button, or select [CANCEL], then press

the Enter button.

Camera Title Edit

SEQ key selects character bank

‘1’ key inserts blank character

‘2’ key inserts selected character

@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^

Camera

Title : Camera 01

[CANCEL] [OK]