User manual

StoreSafe Pro II
User Manual
58
Sensitivity Scope
Figure 53. The sensitivity scope
Use the sensitivity scope to adjust the motion detection sensitivity for the scene. The sensitivity scope is the bar
located near the left-hand corner of the screen.
The black bar raises and lowers to indicate the degree of motion detected. When the black bar reaches the red
bar, a motion detection alarm is activated.
Adjusting Motion Detection Sensitivity: Raise and lower the red bar to change the motion detection
sensitivity. Use the Play Forward button to increase the sensitivity level and the Play Reverse button to
decrease the sensitivity level. The sensitivity level is also displayed as a numeric value.
Main Menu / Motion Detection / Indicate Detection
Figure 54. The indicate detection menu
Motion Detection may be indicated on-screen by displaying the letter M.
Use this menu to turn this feature On or Off.