User manual

StoreSafe Pro II
User Manual
56
Figure 50. Motion detection parameters setup
Navigate in this menu using the Jog to select the field and the Shuttle to change the parameters.
Activity Vs. Intrusion
Activity Detection is a simple type of motion detection having only a sensitivity setting and a relay output.
Intrusion Detection is a more sophisticated type of motion detection, with additional features such as false
alarm rejection levels, minimum target size, and an alarm output.
Activity Detection Setup
If Activity is selected in Motion Detection Type field, the following parameters are enabled:
Relay Output: The unit may be configured to activate a relay output when motion detection is present. Select
either 1, 2, 1+2 (both relays), or None.
Intrusion Detection Setup
If Intrusion is selected in Motion Detection Type field, the following parameters are enabled:
Sensitivity: Rotate the Shuttle to change the motion detection sensitivity, 10 being the most sensitive.
Rejection: Configure the unit’s false alarm rejection feature by selecting Low, Medium, or High. These
settings are based on the number of simultaneously triggered zones and the persistence of motion in a scene.
The Low setting is the most sensitive to motion. The Medium setting will filter out most false alarm situations
due to sudden luminance changes over the whole scene (clouds passing over). The High setting will filter out
sudden luminance changes as well as spurious motion events that do not persist for a number of frames (a bird
flying past the lens).
Target Size: This setting is the minimum number of zones (from the 16 x 16 grid) that must be activated
simultaneously before it is considered to be valid motion.
Link To Alarm: Select the alarm number that you wish to activate when motion detection is activated.