User manual

49
Main Menu / Alarms / Link To A Macro
Figure 38. The macro link list setup menu
Use this menu to link an alarm input to a macro. If a link is created, a macro will run each time that alarm is
activated.
Alarm: Select the alarm input you would like to link.
Macro: Select the macro number you wish to link to. Leave this setting blank if you do not wish to link to a
macro.
Rotate the Jog to navigate, and the Shuttle to change the values.
Save changes and exit the menu: Select [OK], then press the Enter button.
Exit the menu without making changes: Press the Menu button, or select [CANCEL], then press the Enter
button.
Main Menu / Alarms / Switching Alarm Screen
Use this menu to configure how the unit displays alarms. By default StoreSafe Pro II switches to a full screen
display of the camera or cameras in alarm. Select NO in this menu to disable the full screen alarm display. The
alarm will still be recorded but will not change the current display mode.
Macro Link List Setup
Alarm | Macro
01 |
02 |
03 |
|
|
09 |
10 |
01
[CANCEL] [OK]