User manual

StoreSafe Pro II
User Manual
44
Figure 30. Disk test results
Press the Enter button to clear from the display.
Should a disk test fail, several actions will performed:
• An icon will be displayed indicating disk failure. It is displayed on Monitor A on the bottom of
the screen in the middle. This icon will only disappear when the disk is replaced.
• If the Notify Alarm or Notify Record email option is enabled in the Email Notification Setup Screen,
an email will be sent indicating that a disk failure occurred.
Main Menu / Record / Record Lock
Figure 31. The record lock menu
Use this menu to set the Record Lock feature. This feature disables the front panel
record button. Setting Record Lock to ON will start the unit recording if it is not currently
in the Record mode.
Main Menu / Record / ADM (Auto Delete Mode)
The ADM feature prevents the unit from displaying or archiving any search results that are older than the
specified number of days. This feature may be required by law in some jurisdictions. If required by local
authorities, the ADM feature must be turned On by selecting between 1 and 99 days. Typically this feature is
turned Off.