User manual

StoreSafe Pro II
User Manual
42
1. Rotate the Jog to navigate, and the Shuttle to change the values.
2. To save changes and exit the menu: Select [OK], and then press the Enter button.
3. To exit the menu without making changes: Press the Menu button, or select [CANCEL], then press the
Enter button.
Main Menu / Record / Alarm/Event Actions
Use this menu to specify how the unit will record during Alarm and Event actions.
Figure 27. The alarm/event actions menu
Pre Event Duration: The unit will record up to 5 seconds of data ahead of the event trigger, at the Event
Record Rate. Select from 0 to 5 seconds.
Post Event Duration: The unit will record up to 250 seconds after the completion of the Event, at the Event
Record Rate. Select from 0 to 250 seconds.
Pre Alarm Duration: The unit will record up to 5 seconds of data ahead of the alarm trigger, at the Alarm
Record Rate. Select from 0 to 5 seconds.
Alarm Record Mode: Select from Interleaved or Exclusive.
ACTIVITY Link to Event: Select from Yes or No.
Main Menu / Record / Disk Maintenance
Figure 28. The disk maintenance menu
Alarm/Event Actions
Pre Event Duration
Post Event Duration
Pre Alarm Duration
Alarm Record Mode
ACTIVITY Link to Event
5
0
0
Interleaved
Yes
[CANCEL] [OK]