User manual

StoreSafe Pro II
User Manual
34
Main Menu / Time/Date / Set Region
Figure 17. Regional settings menu
Use this menu to set the region for the Auto Daylight Savings Time
feature. Choices are:
• OFF: Clock will not be changed automatically, but can still be adjusted by one hour using the daylight
saving macros.
• USA: DST starts at 02:00 on the first Sunday in April. DST ends at 02:00 on the last Sunday in
October.
Includes: United States (except Hawaii, American Samoa, Guam, Puerto Rico, Virgin Islands, parts of
Indiana and Arizona) and Canada (except Saskatchewan).
• EUR: DST starts at 01:00 GMT on the last Sunday in March. DST ends at 01:00 GMT on the last
Sunday in October. Includes: European Union Countries.
• AUS: DST starts at 02:00 on the last Sunday in October. DST ends at 03:00 on the last Sunday in
March. Includes: South Australia, Victoria, ACT, NSW. Excludes: Tasmania.
The Time Zone must be set correctly to ensure that the DST adjustments are made at the right time. It is also
required for accurate email time stamping.
Note: The clock will only be automatically adjusted once on a given time and date. If you manually set the clock back before
the last DST change, the time will not get automatically adjusted again for that same time change.
Main Menu / Time/Date / Network Time Setup
Use this menu to enable/disable and specify how often time synchronization should occur between StoreSafe
Pro II and the Network Server. The Region /Time Zone must be setup prior to enabling the option.
Update Interval, Select from: Enable, Disable, Once per Day, Twice per Day, and Once per Hour
NTP Primary Server: Enter IP Address of Primary Server.
NTP Backup Server: Enter IP Address of Backup Server.
1. To save changes and exit the menu: Select [OK], then press the Enter button.