User manual

27
The Printer and Print Server must be On-line and Operational.
The Record CD Button
To record video to CD for archival or law enforcement purposes, follow the steps listed below:
1. Push the Open/Close button on the CD Writer. When the tray opens insert a blank recordable CD (CD-
R) into the CD tray. Push the Open/Close button on the CD Writer to close the CD tray.
2. The unit begins writing the QuickWave software to the CD so that the files can later be viewed on any
PC with a CD drive. When QuickWave is finished loaded on OK message will appear. Click OK to
clear.
3. Wait a few moments for the CD Writer to come ready. To check the archive devices status use the
Status Display Box. The Status Display Box can be viewed by pressing the Camera Number button
twice. The LED will turn green when the device is ready.
4. Press the Record CD Button. If the CD Writer is ready the Archive Incident screen will appear,
5. Use the Jog to modify the time parameters and use the Shuttle to move between the Start and Stop
fields.
6. Press the Record button on the front panel when satisfied. A progress bar appears on the lower right of
the monitor.
7. The CD Writer will open the CD tray when completed.
The video may now be viewed on any PC equipped with a CD-ROM.
Figure 9. The archive incident screen
The Record CD Button and Live Viewing
Pressing the Record CD button while viewing live video will cause the Archive Incident screen to appear. The
unit takes the latest recording as its stop time and fits as much of the previous recording as the CD will hold.
The time and size of the archived video can be adjusted by various amounts depending on where on the Hard
Disk the data lies.