User manual

StoreSafe Pro II

User Manual

Multiscreen Display With Sequencing

If a multiscreen display does not include all of the cameras, the remaining cameras can be sequenced in the

bottom right cameo. While in a multiscreen display, press the Sequence button to begin sequencing.

Full Screen Display

Select any camera for Full Screen display by pressing the Number button of the desired camera. Pressing the

Camera number button again displays the Status Display Box. Pressing the same button a third time displays

any associated ATM or cash register ASCII text, see ATM/POS Text Display on page 24.

Sequenced Full Screen Display

While in a Full Screen display, press the Sequence button to begin full screen sequencing.

Zooming

To activate the 2x digital zoom, select the full screen display of the camera you wish to zoom, then press the

Zoom button. Zooming will be indicated by the LED located directly above the Zoom button. Zooming is also

indicated as ZOOM on the primary monitor. Zooming works with frozen and non-frozen images. Zoomed

images can also be frozen.

While Zoomed, rotate the Jog/Shuttle to Pan and Tilt across the image. Please note, the camera does not move

during digital Pan/Tilt.

Press the Zoom button again to cancel the Zoom operations.

Note: If the Zoom button is pressed while in a multiscreen display, the camera from the last active cameo is selected for full

screen display. Press the Zoom button again to activate the Zoom operation.

Freezing

Pressing the Freeze button freezes all camera images on-screen. Full Screen freezing is indicated as FRZ on-

screen. Multiscreen freezing is indicated as

(a flashing asterisk) in each frozen cameo.

Individual cameos can be frozen in Active Cameo mode (see Entering Active Cameo Mode on page 21).

Press the Freeze button again or any camera button to cancel Freeze operations.

Selecting Monitor-B

To control Monitor-B, press the Monitor B selection button. The Monitor-B LED will light to indicate that the

number keypad now controls Monitor-B. Press the Monitor A button to return the keypad control to Monitor-

Playback

Playback always displays on Monitor A. Playback multiscreen borders are black, as opposed to the gray

borders of the live multiscreens. Monitor B continues to display live full screen images in playback mode. To

begin playback, press the Play Forward or Reverse Play button.