User manual

StoreSafe Pro II
User Manual
10
Consult with your MIS personnel for the specific type of configuration. See Main Menu / Communications /
Ethernet Settings on page 67 for information about configuring the ethernet settings in the menu system.
RJ-45 Pin Configuration For Ethernet Port
RS232 Port 1
For a Modem connection or remote control of unit. See Main Menu / Communications / RS232 on page 64 for
information about configuring the modem settings in the menu system. See RS232 Remote Control Protocol on
page 96 for RS232 Remote Control Protocols.
Wire type: Cat 5
Connector type: RJ-45
Max. cable length 100 meters/328 feet
Min. cable length 6 feet/1.8 meters
Hub wiring configuration: Straight through
PC wiring configuration: Cross over
Table 4. Ethernet pin configuration
Pin Use Pin Use
1TX+5Not connected
2TX-6RX-
3RX+7Not connected
4 Not connected 8 Not connected
Table 5. DB-9 pin configuration for port 1
Pin Use Pin Use Pin Use
1DCD4DTR7RTS
2RX5Ground8CTS
3 TX 6 Not connected 9 Not connected