Setup guide

15
When the operator password is entered, will be shown on the status bar of
the screen, and the main menu is NOT allowed to access. The operator user
level needs to be set in the main menu “SYSTEM”  “TOOLS”.
To switch between these two user levels, click the current user level icon to
switch to the key lock mode, and move your mouse to show the password input
keypad, and enter the password of the user level you want.
3.5 VGA Output Resolution Support
Users are allowed to change the resolution depending on their display monitor.
Right-click to display the main menu, and select “ADVANCED CONFIG” 
“DISPLAY”.
ADVANCED CONFIG
CAMERA
DE-INTERLACE
OFF
DETECTION
FULL SCREEN DURATION
03
ALERT
QUAD SCREEN DURATION (For Selected
Models Only)
03
NETWORK
DWELL SCREEN DURATION (For Selected
Models Only)
03
DISPLAY
DISPLAY COVERT
ON
RECORD
HDD DISPLAY MODE
HDD SIZE
DEVICES
VGA OUTPUT
1024 x 768
ALPHA BLENDING
200
EXIT
Move to “VGA OUTPUT”, and select the VGA resolution you want. There are
three options as follows:
 1024 x 768 (default)
 1280 x 1024
 1600 x 1200