SHDVR-04 SHDVR-08 SHDVR-16 H.264 Network DVR Quick Setup Guide GUI Display with USB Mouse Control 1. GUI DISPLAY WITH USB MOUSE CONTROL 1.1 Connect USB Mouse 1.2 Quick Menu Bar 1.3 Main Menu 2. FRONT AND REAR PANELS 2.1 Front Panel 2.2 Rear Panel 3. BASIC OPERATION 3.1 Live Page 3.2 Record Icon 3.3 Playback 3.4 User Level Switch 3.5 VGA Output Resolution Support 3.6 System Sources Reallocation 4. REMOTE SURVEILLANCE 5. PACKAGE CONTENTS 6.
1. GUI DISPLAY WITH USB MOUSE CONTROL 1.1 Connect USB Mouse Connect your USB mouse to one of the USB ports on the DVR front panel, and check if there’s a mouse icon ( ) on the screen, indicating the USB mouse is detected properly. Move your mouse to enter the DVR password with the password keypad. The default administrator password is 0000. The status will be changed from (key lock) to (administrator), and the quick menu bar appears on the left side of the screen.
1.2 Quick Menu Bar Move to the arrow mark to extend the quick menu bar and show the five functions as follows: Quick Menu: Open Click to show the channel switch panel and select the channel you want. For details, please refer to “3.2 Quick Menu Bar” in the user manual. Click to display the playback control panel, and click latest recorded video clip, or click to play the to enter the search list. Switch to the channel you want first, and click to enter the zoom-in mode.
1.3 Main Menu Right-click anywhere on the screen to show the main menu as follows, and right-click again to exit. Main Menu QUICK START Click to set the status display, image settings, and date & time. DATE SETUP Click to set the date display and daylight saving. SYSTEM Click to set the system configurations. EVENT INFORMATION Click to enter the event search menu. ADVANCED CONFIG Click to set CAMERA, DETECTION, ALERT, NETWORK, DISPLAY, RECORD and DEVICES.
Main Menu Structure QUICK START GENERAL TIME SETUP DATE SETUP DATE INFO DAYLIGHT SYSTEM TOOLS SYSTEM INFO CHANNEL TITLE EVENT STATUS DATE DISPLAY MOUSE SENSITIVITY PRIORITY (For Selected Model Only) RECORD CONFIG DATE TIME DISPLAY DATE OF MODE FORMAT DAYLIGHT SAVING LANGUAGE ADMIN PASSWORD OPERATOR PASSWORD UPGRADE BACKUP CONFIG RESTORE CONFIG BAUD RATE HOST ID R.E.T.R.
DETECTION ALERT NETWORK ADVANCED CONFIG DISPLAY RECORD DEVICES (For Selected Models Only) SCHEDULE SETTING RECORD DETECTION ALARM 6 LS SS TS MOTION ALARM AREA EXT. ALERT INT.
2. FRONT AND REAR PANELS 2.1 Front Panel 1) LED Indicators HDD is reading or recording. An alarm is triggered. Timer recording is on. Under playback status. DVR is powered on. 2) (▲) / (▼) / (◄) / (►) Press ▲ / ▼ / ◄ / ► to move up / down / left / right. In the playback mode: Press “” to pause playback. Press “” to stop playback. Press ““ to fast forward. Press ““ to fast rewind. 3) MENU Press to enter the main menu. 4) ENTER Press to confirm the setting.
6) PLAY Press to playback the latest recorded data. 7) SLOW In the playback mode, press to show slow playback. 8) ZOOM Press to enlarge the picture of selected channel in the FRAME or FIELD recording mode. 9) SEQ Press to display each channel in full screen one by one starting from CH1. When the last channel is displayed, it will repeat from CH1 again. To exit this mode, press “SEQ” again. 10) Press to show the 4 channel display mode.
15) USB port There are two USB ports on the front panel, one for connecting your USB mouse for mouse control, and the other one for connecting your USB flash drive for video backup. Note: It’s not allowed to have two USB mice or two USB flash drives connected on the front panel. For the compatible USB flash drive list, please refer to “APPENDIX 3” in the user manual. 16) (For Selected Models Only) Press “ ” to open / close the DVD Writer. 2.
For example, the audio data from audio CH1 will be recorded with the video data from video CH1. 4) AUDIO OUT Connect to a speaker with 1 mono audio output. Note: To know how many audio outputs your DVR supports, please refer to its specifications. 5) MONITOR Connect to a CRT monitor for video output. 6) CALL (For Selected Models Only) Connect to a monitor specific for sequence display. 7) VGA Connect to a LCD monitor directly.
3. BASIC OPERATION 3.1 Live Page Icon Function Icon Function Icon Function Live audio channel (1~4) Playback audio channel (1~4) Audio channel off Digital zoom on Digital zoom off Timer recording Network disconnected Internet connected USB flash drive / device connected USB mouse connected LAN connected No USB device connected Key lock PTZ mode on HDD overwrite Administrator Operator Sequence Motion Recording Alarm Record mode: Frame Record mode: Field Record mode: CIF 3.
2) Event Recording When the motion detection or alarm is on, the motion icon ( ( 3) ) or alarm icon ) shows on the screen for any motion or alarm event. Timer Recording When timer recording is on, you will see “ 4) ” on the screen. HDD Overwritten Be defaults, the HDD overwritten function is set to ON, and “ ” will be shown on the screen. 3.
Playback Control Fast Increase the speed for fast forward. Click Forward once to get 4X speed forward and click twice to get 8X speed, etc., and the maximum speed is 32X. Fast Rewind Increase the speed for fast rewind. Click once to get 4X speed rewind and click twice to get 8X speed, etc., and the maximum speed is 32X. / Play / Pause Click to play the latest recorded video clip immediately, and click again to pause.
Event Search Click to quickly search the recorded files by event lists: RECORD / MOTION / ALARM / TIME, or select FULL to show all the event logs. To quickly search the time you want, select “QUICK SEARCH”. Set the time range you want, and select “SUBMIT” to play the recorded video clip during the specified time. Audio Playback In the playback mode, click on the quick menu bar as many times as needed to select live or playback audio from the audio channel 1~4.
When the operator password is entered, will be shown on the status bar of the screen, and the main menu is NOT allowed to access. The operator user level needs to be set in the main menu “SYSTEM” “TOOLS”. To switch between these two user levels, click the current user level icon to switch to the key lock mode, and move your mouse to show the password input keypad, and enter the password of the user level you want. 3.
Note: To have the best image quality on your LCD monitor, make sure (1) the selected DVR VGA output resolution is supported by your monitor, and (2) the VGA output settings on both the LCD monitor and DVR are consistent. If the image is not positioned or scaled properly, please go to your monitor’s menu for adjustment. For details, please refer to the user manual of your LCD monitor. 3.
4. REMOTE SURVEILLANCE Remote access via different platforms is widely supported: A) ® ® ® For mobile platforms, iPhone , AndroidTM, Windows Mobile & BlackBerry are available with the free program, EagleEyes, installed. B) ® ® ® For web browsers, Internet Explorer , Mozilla Firefox , Safari , Google ChromeTM & Opera are supported. ® C) Apple’s media player, QuickTime , is also another supported tool.
5.
6.
