Operating instructions

10 C2676M-A (8/09)
REMOVING THE HDD
NOTE: It is recommended that you do not remove previously installed drives. If you must remove a drive
for any reason, be sure to note the locations of the drives within the drive basket. It is critical that you
return the drives to their original locations in the DX4500/DX4600.
Remove the HDD (if applicable) from the basket (refer to Figure 7):
1. Using a Phillips screwdriver, unscrew the screws that attach the drive to the basket.
2. Slide the drive out of the basket.
Figure 7. Removing the HDD from the Mounting Basket
INSERTING THE HDD
Insert the HDD in the basket (refer to Figure 8):
1. Position the drive in the basket.
2. Using a Phillips screwdriver, install the screws to attach the drive to the basket.
3. (If necessary) Repeat steps 1 and 2 for each HDD.
Figure 8. Securing the HDD to the Mounting Basket