Use and Care Manual

Sentry Safety Pool Fence 13100 State Road 54, Odessa, FL 33556 1-877-349-3362
Installation: Install Hook and Eyes
If you are making a complete circle with your fence just use the
hook and eye to create tension by screwing the two hooks to both poles.
Remove the second screw from the top, replace it with the hook and
eyes.
If you have a trimmed section or need an alternate placement for the
hook and eye on the pole due to steps or uneven surfaces use a 1/16 drill bit to
drill a hole through the backing and the one side of the pole.
This hole will be tight for the hook and eye and will allow it to self tap into the
pole for proper gripping. Use a pair of pliers to tighten the hook and eyes through
the self-tapping phase.
If you are NOT making a complete circle with your fence take into consideration
that the fence must be attached to a fixed structure.
Then use the hook and eye to attach it and create tension.