Full Product Manual

Step 3
• Use two #12 x 1” self-tapping screws to affix the bracket to the upright.
• Ensure accuracy with your remaining brackets by measuring the length between the bracket to
the bottom of the top rail on your first upright and applying this measurement to the rest of the
brackets. This way, your other brackets will be exactly even.
Sentry Safety Pool Fence - Support 9am - 5pm ET - 1-888-932-4749
Optional Step—Artificial Upright
• If you have a long span (over 60"), a deck that will interfere with a span or are putting in a
gate into a span 38" or larger you may need to use an “Artificial Upright”. (Note: For safety
purposes, ensure that your pool entrance has a self-closing and self-latching gate.)
• Materials: one 4 x 4 wooden post, one 2” sheet metal screw
• Dig a hole about 12" deep by 10" in diameter (size may vary depending on soil conditions)
where you want your artificial upright to be placed.
• Cut the 4 x 4 post to fit the distance between the bottom of the hole and the top of the pool,
place it into the ground
Either set in place with concrete or use 2” screws down through the top rail into the 4 x
4 post to attach it to the pool structure.
• Use instructions in step 3 to mount support brackets to 4 x 4 post.
See ext Page For Images