Full Product Manual

Pre-Installation
• Read the directions completely before beginning.
• Inspect the pool for impediments to installation. Check to make sure that braces are clear of
obstacles and intact.
• Find the skimmer and make sure that it will not interfere with the planed location of the pool
fence.
• Gather the tools needed for installation: cordless drill with Phillips head screwdriver bit, saw,
pencil and measuring tape.
Step 1
• Assemble the mounting brackets and insert support into the base, making sure the support is
even with the back of the base.
• Secure the support into the base with two #8 screws.
Sentry Safety Pool Fence - Support 9am - 5pm ET - 1-888-932-4749
Step 2
• Determine the position where you will install the mounting bracket to each upright by
temporarily sliding the post onto the bracket and measuring the space between the post’s
bottom rail hole and the pool’s top rail. You should not have more than a 4” gap.