Full Product Manual

Step 4
Install the hinges and latch to hold the gate in place. The gate should swing away from the pool.
Install the hinges first on the left of right hand side. Verify that the gate is flush with the top of
the fence and is level. Lastly attach the latch.
The gate is not self closing self latching. The gate is only of convenient entry
not for prevention of access to the pool. Alternate safety products should be
used in with the gate. This may include but is not limited to: folding safety
steps, self closing hinges, self latching lock.
Sentry Safety Pool Fence - Support 9am - 5pm ET - 1-888-932-4749
Step 5
Finish the gate by adding caps.