Full Product Manual

Sentry Safety Pool Fence - Support 9am - 5pm ET - 1-888-932-4749
Step 2
Install mounting brackets created in the previous step. The posts for the gate take the place of
the end posts for the fence. The fence will connect to the gate posts the same as in the instruc-
tions for the pool fence installation. Slide the gate posts into place allowing 1/2 inches between
the inside face of the post and the pool wall top. Use the provided screw to secure the posts in
place.
Step 3
Build the gate next by measuring the gap between the inside faces of the two gate posts. Sub-
tract 1/2" from that measurement and cut the top and bottom rail. When cutting be sure to cut
even amounts off each end for even spindle spacing. Assemble the top and bottom rails with the
spindle and then insert into the vertical gate ends. Before securing with screws double check the
gate fits between the two gate posts and that the gate is square.