Full Product Manual

Pre-Installation
• Read the directions completely before beginning.
• Inspect the pool for impediments to installation. Check to make sure that braces are clear of
obstacles and intact.
• Find the skimmer and make sure that it will not interfere with the planed location of the pool
fence.
• Gather the tools needed for installation: cordless drill with Phillips head screwdriver bit, saw,
pencil and measuring tape.
Part Overview Above
Step 1
The gate is held to the upright by the base; assemble the mounting base with the support. Secure
them together using two screws in both sides of the base / support joint. The support should be
positioned prior to screwing in flush with the backside of the base for full support.
Sentry Safety Pool Fence - Support 9am - 5pm ET - 1-888-932-4749