SDS
Sentinel 747 Plus Mastic Remover 
(VOC Compliant) Safety Data Sheet   
Prepared according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 
11/02/2015 
Sentinel 747 Plus Mastic Remover (VOC 
Compliant) 
4/7 
Skin and body protection 
: 
Wear suitable protective clothing. 
Respiratory protection 
: 
An approved organic vapor respirator/supplied air or self-contained breathing apparatus must be 
used when vapor concentration exceeds applicable exposure limits. 
SECTION 9: Physical and chemical properties 
9.1.  Information on basic physical and chemical properties 
Physical state 
: 
Liquid 
Appearance 
: 
Clear 
Color 
: 
Blue 
Odor 
: 
Mild solvent odor 
Odor Threshold 
: 
No data available 
pH 
: 
Not applicable 
Relative evaporation rate (butyl acetate=1) 
: 
No data available 
Melting point 
: 
No data available 
Freezing point 
: 
No data available 
Boiling point 
: 
184 - 194 °C (363-381 °F) 
Flash point 
: 
77 °C (170 °F) Note: Minimum. Method: PMCC 
Self ignition temperature 
: 
216 °C (421 °F) 
Decomposition temperature 
: 
No data available 
Flammability (solid, gas) 
: 
No data available 
Vapor pressure 
: 
< 0.2 mm Hg @ 68 °F 
Relative vapor density at 20 °C 
: 
Heavier than air. 
Relative density 
: 
No data available 
Solubility 
: 
No data available 
Log Pow 
: 
No data available 
Log Kow 
: 
No data available 
Viscosity, kinematic 
: 
No data available 
Viscosity, dynamic 
: 
No data available 
Explosive properties 
: 
No data available 
Oxidizing properties 
: 
No data available 
Explosive limits 
: 
No data available 
9.2.  Other information 
VOC content 
: 
< 15 g/l 
*When determining VOC content in accordance with the requirements set forth by the Ozone 
Transport Commission (OTC), effective 01-01-2009 
SECTION 10: Stability and reactivity 
10.1.  Reactivity 
No dangerous reactions known under normal conditions of use. 
10.2.  Chemical stability 
Stable under recommended handling and storage conditions (see section 7). 
10.3.  Possibility of hazardous reactions 
None known. 
10.4.  Conditions to avoid 
Sparks. Heat. Open flame. 
10.5.  Incompatible materials 
Avoid contact with : Oxidizing agent. 
10.6.  Hazardous decomposition products 
Thermal decomposition generates : Carbon oxides (CO, CO2). 







