User manual

V1.01

4-2.2 SENSOR SETUP

Item Description

Sensor Popup

Check the box to Enable/Disable popup screen function for all

channels. When Sensor is detected in LIVE mode, the detected

channel image will pop up in full screen display.

All Off

Set all sensor off

All Low

Set all sensor polarity low

All High

Set all sensor polarity high

Sensor Polarity

Click or press ▼ to select between HIGH, LOW voltage for

triggering sensor detection or OFF to turn off polarity for each

channel

Low Polarity：Sensor has not been triggered. When connected,

sensor will be turned on..

High Polarity：Sensor has been triggered. When connected, sensor

status will be turned off..

Off ：Sensor is deactivated, and will not be turned on/off.

Note

：

4CH DVR will display 4 channels and 8CH DVR will display 8 channels.