User manual

V1.01
16
Table 3-3.2 Mouse operation under the PTZ mode
Icon Description
Leave PTZ Mode，back to the LIVE mode
Pre-set number N. (1~64)
Go to pre-set number N.
Set current PTZ location at pre-set number N.
「TOUR」，press to activate pre-set tour＊
「PIP」，Set current PTZ location as the start
of line-scan. ＊
「FREEZE」， Activate line-scan. ＊
「ZOOM」，Set current PTZ location as the end
of line-scan. ＊
To move PTZ in 360°
PTZ zoom in; PTZ zoom out
PTZ focus in; PTZ focus out.
PTZ IRIS open, PTZ IRIS close.
Below functions need support from specific PTZ manufacturer.
Please check user manual of your PTZ for more detail.
AUX 1,「AUTO」Key ＋ Number key「1」
AUX 2,「AUTO」Key ＋ Number key「2」
AUX 3,「AUTO」Key ＋ Number key「3」
AUX 4,「AUTO」Key ＋ Number key「4」
AUX 5,「AUTO」Key ＋ Number key「5」