User guide

Compact 4Ch H.264 Network DVR-MU.Ver1.1
35
3.8.3.4.3 Time Ends
“Time Ends” indicates the end date of daylight saving time. The user can set the month,
week number, day, and hour.
Time Ends 
Month ◄October►
Week [First Week]
Day [Sunday]
Hour [0]
3.8.3.5 NTP Server
NTP Server allows for the synchronization of the day/ time settings with the NTP server
through internet.
DAY/TIME SETUP 
Date Display Mode [YYYY/MM/DD]
Time Set [2010/06/14 11:18:19]
Time Zone [GMT +08:00]
[Taipei]
Daylight Saving Time
Active Daylight Saving [X Disable]
Time Starts [Not definition]
Time Ends [Not definition]
NTP Server
Activate Service [√ Enable]
Server IP [time.stdtime.gov.tw]
Interval (Days) [3Day]
Synchronize Now
 Activate Service:
“ Enable”- Enable Synchronization
” X Disable”- Disable Synchronization
 Server IP: The IP address of NTP server (Maximum in 24 characters)
 Interval (Days): The frequency (number of days) of when the server is synchronized.
 Synchronize Now: Start synchronizing with NTP server now