User guide

Compact 4Ch H.264 Network DVR-MU.Ver1.1
25
“Sensitivity Normal”: Normal sensitive level
“Sensitivity High”: High sensitivity level
“Sensitivity Highest”: Highest sensitive level
3.6.2.2 Blind Detect Alarm Mode
Select the alarm mode when the Blind Detect Mode is triggered.
“Mute”: No beep whatever loss of light or not.
“ Buzzer-Short”: Beep shortly by buzzer on main board.
“ Buzzer-Long”: Beep long by buzzer on main board.
3.6.2.3 Video Loss Mode
The Video Loss Mode is for detecting the loss of the camera video input.
3.6.2.4 Video Loss Alarm Mode
Select the alarm mode when the Video Loss Mode is triggered.
“Mute”: No beep whatever video loss or not.
“ Buzzer-Short”: Beep shortly by buzzer on main board.
“ Buzzer-Long”: Beep long by buzzer on main board.
3.6.3 Motion Setup
Motion Setup is accessed to configure the motion mode for each channel.
DETECTOR SETUP 
Channel Number
Alarm Setup
Motion Setup
Record Detection Activate [Enable]
Motion Mode [Sensitivity Normal]
Record Time [10Sec]
Alarm Mode [Mute]
Alarm Time [10Sec]
Trigger Full Screen [OFF]
Trigger Type [Initial Trigger]
Motion Area Setup 
NOTE Remember to setup the motion mode period on “Record Schedule” at
the main menu of “Record Setup” after completing “Motion Setup”.
Otherwise, the system will be recording in the default schedule
recording mode.