User guide

Compact 4ch H.264 Network DVR-MU.Ver1.1
24
3.6 Detector Setup
Detector Setup configures the alarm and motion mode for each or all channels.
DETECTOR SETUP 
Channel Number
Alarm Setup
Blind Detect Alarm Mode [Sensitivity OFF]
Blind Detect Alarm Mode [ Buzzer-Short]
Video Loss Mode [X Disable]
Video Loss Alarm Mode [ Buzzer-Short]
Motion Setup
3.6.1 Channel Number
To sets the detection mode by each or all channels.
Select the icon “ ” to setup the alarm and motion mode of all channels at one time.
Select the icon “ ”, “ ”, “ ”, “ ” to setup for the each channel.
3.6.2 Alarm Setup
Alarm Setup is accessed to configure the alarm mode of each channel, individually, or
for all channels, simultaneously.
DETECTOR SETUP 
Channel Number
Alarm Setup
Blind Detect Alarm Mode [Sensitivity OFF]
Blind Detect Alarm Mode [ Buzzer-Short]
Video Loss Mode [X Disable]
Video Loss Alarm Mode [ Buzzer- Short]
Motion Setup
3.6.2.1 Blind Detect Mode
The Blind Detect Mode detects any abnormal video input when the security camera is
situated in covered or shady areas or in areas with direct exposure to intense light.
Choose any of the following settings to adjust the sensitivity of blind detection:
“Sensitivity OFF”: No sensitivity
“Sensitivity Low”: Low sensitive level