User guide

Compact 4Ch H.264 Network DVR-MU.Ver1.1
7
Connect the Network Cable
Connect the network cable to the LAN port labeled as “ ” on the DVR. This connects
the DVR to the network.
Connect the USB mouse
Connect the USB mouse to the mouse port labeled as “ ” on the DVR.
This port only supports a USB mouse and not other devices.
Connect the IR Extender (Optional)
Connect the IR extender cable to the port labeled as “IR_ext” on the DVR. The cable is
an optional device which serves as an IR controller extension.
Connect the LCD Monitor
Connect the LCD monitor to the VGA output labeled as “VGA-OUT” on the DVR. The
DVR will transmit the video signal to the LCD monitor through this connection.
Connect the Power Adaptor
Connect the Power Adaptor to the DC jack labeled as “DC-IN 12V” on the DVR.
Connect the power adaptor after all devices have been properly installed.