User guide

Compact 4ch H.264 Network DVR-MU.Ver1.1
6
2.2 Video Format Detection
The DVR can automatically detect the video format (either NTSC or PAL) after the
cameras have been properly installed and the DVR has been powered on.
Please refer the section “Hardware Setup” to setup the NTSC/PAL auto detection.
2.3 Connection Guide
Connect all peripheral devices properly before turn on the DVR.
Connect the Security Camera
Connect the security cameras to the video inputs labeled as “CH1” to “CH4” on the
DVR. This connection provides the DVR with the surveillance video input.
Connect the Security Monitor
Connect the security monitor to the video output labeled as “VIDEO-OUT” on the DVR.
The connection provides a video transmission path from the DVR to the security
monitor.
Security Camera
IR Extender
Power Adaptor
Network Cable
LCD Monitor
MouseSecurity Monitor