User's Manual

Industrial PDA
Don't put the tester in the low temperature place.
Because when you move the tester from lower temperature
place to the normal temperature place, there will be
moisture inside of the tester, which may damage the
circuits board.
Please don't try to uninstall the tester because the
improper operation of the nonprofessional person may lead
to the damage of the tester.
Please don't throw, hit or shake the tester because all
rude using method break the inside main board.
Please don't use the irritant chemicals, irritant
cleanser or caustic cleanser to clean the tester. When
cleaning the tester, please use rag with mild soap water to
wipe gently.
Please don't spread the pigment for the tester.
Because the pigment may obstruct the usage of the active
accessories.
Note: The max SAR is 2.0W/Kg, which meets the
requirement of the national standard GB 21288.