User's Manual

Industrial PDA
Close the equipment
Under standby interface, long press the power key to
pop up an option menu and then choose "Power Off" to
close the equipment.
2.2. Standby and Wake up
Under the "on" condition, the system will enter into
standby state or shortly press on/off key to enter into
standby state. Under standby condition, shortly press on/off
key to wake up the system. (The time entering into standby
is relevant with the backlight time setting in setup options. If
the setting is "Light Forever", the system will not standby
automatically. But you still can realize the standby by
pressing on/off key.)
After waking up, the system will restore to the interface
before the standby and the program will restore to the state
before the standby.
2.3. Desktop management
The desktop screen acquiesces five screen, the
desktop can display different screen through finger to slide
Lock and Unlock
When there is not equipment operation, after a period
of time, the screen will lock automatically. We can rouse the
screen through power key. We click the lock icon, then we
need to slide up to unlock. As shown,