Data Sheet

24
7.2.2 File Setting
Fig. 7-12 Interface Diagram of Menu“File Setting”
File setting menu provides information of trace dialog box of “measuring location, SN of
optical fiber, terminal position of optical fiber, category of optical fiber, operator, and note”.
Operator can fill in the corresponding character information according to the condition of
project.
Auto saving: It provides two options- ON and OFF. When the auto saving status is “ON”,
the file will be automatically named and set to “ON” status. The auto naming category is
optional. Automatic storage file is the presence of SD card under the root directory, when the
OTDR is not inserted the SD card after the measurement will pop up warning window prompts.
Auto naming: It provides two options- ON and OFF. When the auto naming status is “ON”,
the auto naming category is optional. When the auto naming status is “OFF”, the auto naming
function is off.
Default setting recovery: auto saving status is “OFF”; auto naming status is “ON”; Serial
number is “001”; file format is “.sor”; auto naming category is “wave length + date + serial
number”; the note is blank.