Specifications

Tel: [phone] Fax: [phone]
Email: [e-mail]
URL: www.talikom.com.my
2
Size :
a. Pulley No. 1 (Aluminium)
b. Pulley No. 1 (PVC)
c. Pulley No. 3 (PVC)
CLE1304
OVERHEAD
PULLEY
is economical block has an aluminum roller &
is used for new strand & overlash work.
Can accommodate up to a 2” (5.08 cm) cable
CLE1305
OVERHEAD
PULLEY (M)
Guide the cable surely round each curve and cable friction is
minimized. Even heavy duty cables run lightly o the rollers.
e required winching power is consider-ably reduced and
winching wires are no longer abraded as much.
Guide the cable surely round each curve and cable friction is
minimized. Even heavy duty cables run lightly o the rollers.
e required winching power is consider-ably reduced and
winching wires are no longer abraded as much.
CLE1306 ROLLER GUIDE
CLE1307
QUAD ANGLE
ROLLER
Mounted on the verge of manhole to protect cables and pulling ropes.
Edge Mount Manhole Lead In Cable Roller e MR1 manhole cable
roller leads the cable from the drum into the jointbox/ manhole or the
winch bond out of the manhole. e roller has 2 hooks for location on
the manhole edge.
CLE1308
MANHOLE
ROLLER
Designed for use in narrow trenches. Lightweight assembly suitable for
cables up to 76mm diameter. Zinc plated steel frame tted with large
wasted ,solid aluminum roller running on low friction sintered bushes.
Base size : 320mm x 145mm.
Weight : 2.75Kgs
CLE1309 GROUND ROLLER