Specifications

12
Tel: [phone] Fax: [phone]
Email: [e-mail]
URL: www.talikom.com.my
12
Heat-shrinkable composite joint closure system for environmental and me-
chanical protection of joints in the unpressurised telephone network: aerial,
buried or ducted, non lled or jelly lled cables with polyethylene, lead, steel
or aluminum sheaths.
No 1 : XAGA 500-43/8-150 [10 - 30 PR]
No.2 : XAGA 500-55/12-300 [50 - 100 PR]
No.3 : XAGA 500-75/15-300 [100 PR]
No.4 : XAGA 500-100/25- 500 [200 PR]
TCY1090
HSW XAGA
500
XAGA 1000 is a pressurized closure system based on a unique ber reinforced
heat shrink able composite material. Its reinforced material structure has an
excellent split resistance during installation and superior mechanical tough-
ness. e closures have built-in visual indicators to ensure optimum installa-
tion under the most severe conditions.
No.1 : XAGA 1000-62/15-500 [200 PR]
No.2 : XAGA 1000-92/30-500 [400 PR]
No.3 : XAGA 1000-122/38-500 [400 - 800 PR]
No.4 : XAGA 1000-160/55-500 [1400 -2000 PR]
No.5 : XAGA 1000-200/65-500 [2400 PR]
- Reinforced heat-shrinkable wraparound sleeve with incorporated
pressure access point
- Special high performance hot-melt adhesive to ensure a reliable seal
- Can be used immediately aer cooling down to ambient temperature
No. 1 : RWPS-C-45/15-250
No. 2 : RWPS-C-65/20-250
No. 3 : RWPS-C-95/30-250
Heat shrink tubing is a mechanically expanded extruded plastic tube ordinarily
made of nylon or polyolen, which shrinks when heated in an eort to return
to the original relaxed diameter as when it was extruded. Heat shrink tubing is
manufactured in a multitude of varieties and chemical makeups with the exact
composition of each type being dependent on the intended application.
No.1 : Tubing HRA 27/8
No.2 : Tubing HRA 30/8
No.3 : Tubing HRA 35/12
No.4 : Tubing HRA 50/16
No.5 : Tubing HRA 75/22
A branch-o clip is a three-legged aluminum die cast piece. e best
quality of corrosionresistant aluminum is used for casting. ese branch-
o clips are used to branch a joint into one in and two or three out. e
hot melt in the center leg lls and seals the gaps at the branch-o joint.
No. 1&2 (S) : 65*28
No. 3&4 (M) : 85*40
No. 5&6 (L) : 104*59
No. 7&8 (XL) : 127*68
TCY1100 HSW XAGA 1000
TCY1150 RWPS
TCY1200
HEAT SHRINK
TUBING
TCY1250 BOKT