Installation Guide

ManualsBrandsSentek ManualsDrillsBluetooth Drill & Drop Probe

Drill & Drop Bluetooth

What’s In the box?

•

Sentek Drill & Drop Bluetooth Probe

•

High current ER14505 Lithium Ion battery

What You Need To Get Started

•

Android Mobile Device (a phone!) with Bluetooth Capability*

•

Google Play Store account

Quick Start

•

Go to the Google Play Store

•

Search for the application called Sentek Connect,

•

Install the Sentek Connect App

Next Steps

•

Open the Sentek Connect application

•

Follow the steps to setup your phone and probe.

•

Install the probe in the ground using the installation guide.

•

Perform a Field Test and Start collecting data

• Mobile device must be running

Android version 4.3 or later.

• Requires Bluetooth 4 capability.

Summary of content (5 pages)

PAGE 1
Drill & Drop Bluetooth What’s In the box? • Sentek Drill & Drop Bluetooth Probe • High current ER14505 Lithium Ion battery What You Need To Get Started • Android Mobile Device (a phone!) with Bluetooth Capability* • Google Play Store account Quick Start • Go to the Google Play Store • Search for the application called Sentek Connect, • Install the Sentek Connect App Next Steps • • • • Open the Sentek Connect application Follow the steps to setup your phone and probe.
PAGE 2
Scan button – starts scanning for probes within range Menu button – opens the context sensitive menu. Drill & Drop Wireless Global Download button – starts download process for each probe visible on screen. Battery full, 3.2 – 3.6 Volts Yellow: Factory state, no configuration at all. Battery Status Probe Status Battery low, < 3.2 Volts. Probe will still work but battery near end of life Yellow + Green: Configured but not deployed yet.
PAGE 3
IrriMAX Live Account Enable/Disable IrriMAX live accounts are enabled/disabled in the Configuration wizard – after successfully establishing a connection with a probe the current state of the probe is retrieved – the status will change from “None” to “Enabled” and visa-versa.    None: No IrriMAX user account has been associated with the probe – this is the default state of a new probe – or a connection with the probe has not yet been established to retrieve the account details from the probe.
PAGE 4
Probe Settings Menu Settings – Allows the user to customise the probe settings to their own preferences. Clear Data – Clears all data records stored on the probe. Force Download – Forces download of all data records stored on the probe regardless of whether or not they have already been downloaded to the mobile device. About – Provides details regarding the version of code installed on the probe – as well as any error codes if errors have occurred. (These need to be reported to Technical Support.
PAGE 5
Drill & Drop Bluetooth FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Information to user: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.