Quick Start Guide
1608 4th Street Suite 200 Berkeley CA 94710
|
www.sensysnetworks.com/resources
|
P 510.548.4620 F 510.548.8264
Congure Repeater (cont.)
Click the Auto-assign All button to automatically assign all
Sensors and Repeaters to optimal timeslots.
Note: The grayed out options can be made accessible by enabling
Advanced Mode using the Advanced drop-down menu.
To manually set the time slot, TracDOT lters the contents of
the drop-down list so that only available time slots are displayed.
Click an entry from the Change Timeslot to drop-down list and
then click Set Timeslot to accept changes.
To change the drop-down list to include all time slots in the
network (both assigned and unassigned), remove the check in
the Show only available slots.
Specifying Time Slot
Click SAVE to save changes
made to the access point.
Save Conguration
Quick Start Guide: FlexRepeat3 Solar Repeater
Click Set Channel(s) to
accept conguration changes.
Save Conguration