Quick Start Guide
1608 4th Street Suite 200 Berkeley CA 94710
|
www.sensysnetworks.com/resources
|
P 510.548.4620 F 510.548.8264
Connect to Access Point
Select an access point from the list of APCCs
and Access Points and click Connect.
Note: Ensure the box for Load map data is
checked before clicking Connect.
Select IP address
Click the icon to start TracDOT2.
Run TrafcDOT
4
The Main window displays. The map on the Main window
populates and congured equipment appears on the map and
in the sensor tray at the bottom of the window.
Main Window
FlexRepeat3 Solar requires
TracDOT2 software 2.12.12
or later.
Requirements
Quick Start Guide: FlexRepeat3 Solar Repeater