Quick Start Guide

1608 4th Street Suite 200 Berkeley CA 94710
|
www.sensysnetworks.com/resources
|
P 510.548.4620 F 510.548.8264
Quick Start Guide: FlexRepeat3 Solar Repeater
3
Mount FlexRepeat3 Solar on Pole
Assemble the mounting kit onto the pole. Attach mounting arm to the mounting plate. Attach the FlexRepeat3 Solar to the mounting
arm with the Towards Sensors side facing the sensors and access point or supporting repeater. Ensure the mounting arm is
tightened so the repeater cannot move. Note that the mounting arm can be oriented to adjust the location of the FlexRepeat3 Solar.
Mount The FlexRepeat3 Solar
Connect to one of the external antenna options with a coax cable. Two options are supported: (a) the FLEX-ANT-1
with the same RF range as the internal antenna and (b) the FLEX-ANT-2 with Long Range RF range. Point the
external antenna towards the sensors. The roles of the internal and external antenna can also be switched.
Connect External Antenna (Optional)
a
b
Ensure at least one
solar panel has
access to the optimal
available sunlight.