Quick Start Guide

1608 4th Street Suite 200 Berkeley CA 94710

www.sensysnetworks.com/resources

P 510.548.4620 F 510.548.8264

Quick Start Guide: FlexRepeat3 Solar Repeater

Turn On Repeater

Unscrew the metal cap for the external antenna cable outlet (a) and discard (b).

Note: If the FlexRepeat3 Solar is not used with a external antenna then do not remove cap.

For Use of External Antenna Only

Unscrew the black cap to expose the red jumper and LED indicator.

WARNING: DO NOT open repeater. Removing top could damage unit.

Unscrew Power Jumper Cap

Remove the red jumper (a) and place the jumper on one pin (b). Wait approximately

ve seconds for LED light to blink red to ensure unit is turned on. After ensuring the

unit is properly turned on, screw on the black cap.

Note: To turn o, return jumper to original position.

Remove Red Jumper

a b