User manual
SENSUS
™
Pain Management User Manual
7
Briey press and release the button.
Indicator Light Flash
charged
recharge
Snap in a new electrode.
Step 1: Check Battery
Step 2: Attach Electrode
Chapter 2: Quick Start Instructions
Press and hold button for 10 seconds until the indicator light is
steady green. Briey press the button every time you feel a tingling
sensation under the electrode. When the light turns off, congura-
tion is complete. This should take about 1 minute.
Step 3: Place Device
Remove liner and place the
device on your upper calf 1-2
inches below knee; the exact
position is not critical.
Step 4: Configure
The following instructions will help you start using SENSUS quickly. For
detailed instructions, please review Chapters 3-8. These instructions are
also available in video format. Please visit www.SENSUSRx.com and
click on the
Resources for Users
tab.