User manual
SENSUS
™
Pain Management User Manual
28
APPENDIX B: Troubleshooting
Configuration:
I cannot start the configuration procedure (light is not
steady green).
Make sure the device and electrode are properly placed on the
leg and the liner has been removed. Press and hold the button
down for at least 10 seconds until the light turns steady green.
I am trying to configure, but I do not feel anything.
It may take 20-30 seconds to rst feel the tingling
stimulation sensation.
Starting Therapy:
Make sure you are starting therapy correctly by pressing the
button for several seconds until the light starts blinking green.
Therapy can only be initiated after the device and electrode are
securely placed on the calf.
When I start therapy nothing happens (i.e., light is off).
Recharge device.
When I start therapy all I see is a single red blink.
Recharge device.
When I start therapy the light blinks green a few times
and stops.
Congure device.