User manual

SENSUS
™
Pain Management User Manual
11
Figure 6.
Attaching Electrode
You will need to attach a new electrode prior to rst use of the
device and every 2 weeks thereafter (can be extended up to
3 days if a new electrode is not available). Two electrodes are
included in each pouch. You should reseal the pouch if it contains
an electrode. To attach an electrode, snap the electrode into the
two connectors as shown in Figure 7.
ONLY USE SENSUS ELECTRODES MANUFACTURED BY
NEUROMETRIX, INC.
Remove the plastic liner covering the electrode (Figure 8) prior to
placing the device on your leg. Remember to keep the liner as it
should be re-applied to protect the electrode when not in use.
Figure 7.
Turn the device so that
the snap connectors
are visible.
Align the snaps on the electrode to the
snap connectors on the device. Insert
snaps until they are securely fastened.