User's Manual

VXU Operator’s Manual
Metering Systems
- 9 -
3. Once the class has been changed, make sure all connections are still good,
and that the VXU itself is on, and then press “CTRL + R” to begin reading
meters.
4. It is important to save the readings periodically while reading. Every 15
minutes is a good rule of thumb. To save the readings to disk, first halt the
interrogation by pressing “ESC”. Wait about 10 seconds until the
Interrogation stops. Then press “CTRL + E” to export to disk. Another
window will appear which prompts you to choose the location to save the file.
The “3 ½ inch Floppy A:” should be selected. Usually, you can just press