User's Manual

VXU Operator’s Manual
Metering Systems
- 8 -
1. Double click on the proper route file, or click once on the file name to select it,
and then click on the button labeled “Open”. The route should then be
retrieved from the diskette to the AutoVu database. Remember that when
you retrieve a route that has been read previously with the laptop, it will erase
any other readings you had taken for that route last time.
2. Once the route is retrieved, remember to change the CYCLE to something
different than it was the last time the route was read. For example, if you
read on Cycle 7 last month, change to Cycle 6, or Cycle 8, or any other
different cycle. If the cycle is not changed, no MXUs will respond to the VXU.
To change the Cycle, move the pointer up to “Route” again and select “Edit
Cycle/Class”. Then choose a different Cycle number, and click “OK” to save
the change.