User's Manual

RadioRead
®
Mobile Radio Vehicle Transceiver Unit (VXU)
SPECIFICATIONS
Invensys Metering Systems
P.O. Box 487
450 N. Gallatin Avenue
Uniontown, PA 15401
1-800-METER-IT
1-800-638-3748
FAX (Direct to Factory)
Local: [phone]
Toll Free: 1-800-888-2403
Web site: www.ims.invensys.com
select
North American Water
Email: [e-mail]
AUTHORIZED INVENSYS DISTRIBUTOR
VXUSPEC
2 of 2
FCC REGULATIONS
All equipment must comply with current Federal Communications
Commission (FCC) requirements which include proper labeling of the
VXU. Modifications to transceiver equipment not authorized by Invensys
Metering Systems may void FCC equipment certification. .
FREQUENCY/MODULATION
The VXU will operate on the 956 MHz channel for the purposes of
alerting the MXU in a licensed mode. It will utilize AM modulation for
the alert tone.
The vendor will be responsible for assisting the utility in obtaining any
required license from the FCC for operation of the equipment.
CARRYING CASE
The VXU will be supplied with a portable carrying case to permit easy
storage and transportability of the VXU as one unit. The carrying case
must be able to store all components of the VXU package required for
vehicle meter reading via radio AMR.
INSTALLATION AND TRAINING
Complete installation and operating instructions will be included for all
of the supplied hardware and software equipment.
Proposal must include any additional costs for training and assistance
to install and begin operation of the VXU and operating software. The
vendor will also inform the customer of what pre-installation activities
are to be completed and what support materials will be needed for the
initial installation.
PERFORMANCE WARRANTIES
In evaluating bid submittals, warranty coverage will be considered. The
vendor shall be required to state its warranty and/or guarantee policy
with respect to each item of proposed equipment. The procedure for
submitting warranty claims must also be provided.
SYSTEM MAINTENANCE AND SUPPORT
In addition to initial warranty periods, vendors are required to supply
information on required or optional maintenance programs beyond the
warranty period for both hardware and software. Features of those pro-
grams shall also be included with any additional charges such as an
hourly rate for on-site and/or remote support. The location of and pro-
cedures for obtaining such support shall be stated.
➀ See additional specifications.
RF Exposure Notice Per FCC Rules 

To meet the RF exposure requirements in 1.1307 of FCC Rules, a separation distance of 
at least 53 cm (21 inches) shall be maintained from all persons during operation of the 
transmitter.